This script will help you to change the user UPN (userPrincipalName attribute in the Active Directory) for all the user objects located in the OU OU=Users,OU=Dept,DC=domain,DC=local,DC=net
Old UPN : domain.local.net
New UPN : newdomain.com
To setup a new UPN, follow these steps :
- Open a MMC
- Load the snapin Active Directory Domains and Trusts
- Right click on the “Active Directory Domains and Trusts” and then select “Properties”
- Fill the field “Alternative UPN suffixes :” and click on the Add button
- Click on the OK button to validate
Script :
Get-ADUser -Filter {UserPrincipalName -like "*@domain.local.net"} -SearchBase "OU=Users,OU=Dept,DC=domain,DC=local,DC=net" | % { Write-Host $_.Name $UPN = $_.UserPrincipalName.Replace("domain.local.net","newdomain.com") Set-ADUser $_ -UserPrincipalName $UPN }
Reference
Syntax
Set-ADUser [-Identity][-AccountExpirationDate ] [-AccountNotDelegated ] [-Add ] [-AllowReversiblePasswordEncryption ] [-CannotChangePassword ] [-Certificates ] [-ChangePasswordAtLogon ] [-City ] [-Clear ] [-Company ] [-Country ] [-Department ] [-Description ] [-DisplayName ] [-Division ] [-EmailAddress ] [-EmployeeID ] [-EmployeeNumber ] [-Enabled ] [-Fax ] [-GivenName ] [-HomeDirectory ] [-HomeDrive ] [-HomePage ] [-HomePhone ] [-Initials ] [-LogonWorkstations ] [-Manager ] [-MobilePhone ] [-Office ] [-OfficePhone ] [-Organization ] [-OtherName ] [-PasswordNeverExpires ] [-PasswordNotRequired ] [-POBox ] [-PostalCode ] [-ProfilePath ] [-Remove ] [-Replace ] [-SamAccountName ] [-ScriptPath ] [-ServicePrincipalNames ] [-SmartcardLogonRequired ] [-State ] [-StreetAddress ] [-Surname ] [-Title ] [-TrustedForDelegation ] [-UserPrincipalName ] [-AuthType { | }] [-Credential ] [-Partition ] [-PassThru ] [-Server ] [-Confirm] [-WhatIf] [ ]
- Identity
- AccountExpirationDate
- AccountNotDelegated
- Add
- AllowReversiblePasswordEncryption
- CannotChangePassword
- Certificates
- ChangePasswordAtLogon
- City
- Clear
- Company
- Country
- Department
- Description
- DisplayName
- Division
- EmailAddress
- EmployeeID
- EmployeeNumber
- Enabled
- Fax
- GivenName
- HomeDirectory
- HomeDrive
- HomePage
- HomePhone
- Initials
- LogonWorkstations
- Manager
- MobilePhone
- Office
- OfficePhone
- Organization
- OtherName
- PasswordNeverExpires
- PasswordNotRequired
- POBox
- PostalCode
- ProfilePath
- Remove
- Replace
- SamAccountName
- ScriptPath
- ServicePrincipalNames
- SmartcardLogonRequired
- State
- StreetAddress
- Surname
- Title
- TrustedForDelegation
- UserPrincipalName
- AuthType
- Credential
- Partition
- PassThru
- Server
- Confirm
- WhatIf
Set-ADUser -Instance[-SamAccountName ] [-AuthType { | }] [-Credential ] [-Partition ] [-PassThru ] [-Server ] [-Confirm] [-WhatIf] [ ]
- Instance
- SamAccountName
- AuthType
- Credential
- Partition
- PassThru
- Server
- Confirm
- WhatIf
Detailed Description
The Set-ADUser cmdlet modifies the properties of an Active Directory user. You can modify commonly used property values by using the cmdlet parameters. Property values that are not associated with cmdlet parameters can be modified by using the Add, Replace, Clear and Remove parameters.
The Identity parameter specifies the Active Directory user to modify. You can identify a user by its distinguished name (DN), GUID, security identifier (SID) or Security Accounts Manager (SAM) account name. You can also set the Identity parameter to an object variable such as $
The Instance parameter provides a way to update a user object by applying the changes made to a copy of the object. When you set the Instance parameter to a copy of an Active Directory user object that has been modified, the Set-ADUser cmdlet makes the same changes to the original user object. To get a copy of the object to modify, use the Get-ADUser object. The Identity parameter is not allowed when you use the Instance parameter. For more information about the Instance parameter, see the Instance parameter description. For more information about how the Instance concept is used in Active Directory cmdlets, see about_ActiveDirectory_Instance.
The following examples show how to modify the Manager property of a user object by using three methods:
-By specifying the Identity and the Manager parameters
-By passing a user object through the pipeline and specifying the Manager parameter
-By specifying the Instance parameter.
Method 1: Modify the Manager property for the “saraDavis” user by using the Identity and Manager parameters.
Set-ADUser -Identity “saraDavis” -Manager “JimCorbin”
Method 2: Modify the Manager property for the “saraDavis” user by passing the “saraDavis” user through the pipeline and specifying the Manager parameter.
Get-ADUser -Identity “saraDavis” | Set-ADUser -Manager “JimCorbin”
Method 3: Modify the Manager property for the “saraDavis” user by using the Windows PowerShell command line to modify a local instance of the “saraDavis” user. Then set the Instance parameter to the local instance.
$user = Get-ADUser -Identity “saraDavis”
$user.Manager = “JimCorbin”
Set-ADUser -Instance $user.
For AD LDS environments, the Partition parameter must be specified except in the following two conditions:
-The cmdlet is run from an Active Directory provider drive.
-A default naming context or partition is defined for the AD LDS environment. To specify a default naming context for an AD LDS environment, set the msDS-defaultNamingContext property of the Active Directory directory service agent (DSA) object (nTDSDSA) for the AD LDS instance.
Parameters
AccountExpirationDate
Specifies the expiration date for an account. When you set this parameter to 0, the account never expires. This parameter sets the AccountExpirationDate property of an account object. The LDAP Display name (ldapDisplayName) for this property is accountExpires.
Use the DateTime syntax when you specify this parameter. Time is assumed to be local time unless otherwise specified. When a time value is not specified, the time is assumed to 12:00:00 AM local time. When a date is not specified, the date is assumed to be the current date. The following examples show commonly-used syntax to specify a DateTime object.
“4/17/2006”
“Monday, April 17, 2006”
“2:22:45 PM”
“Monday, April 17, 2006 2:22:45 PM”
These examples specify the same date and the time without the seconds.
“4/17/2006 2:22 PM”
“Monday, April 17, 2006 2:22 PM”
“2:22 PM”
The following example shows how to specify a date and time by using the RFC1123 standard. This example defines time by using Greenwich Mean Time (GMT).
“Mon, 17 Apr 2006 21:22:48 GMT”
The following example shows how to specify a round-trip value as Coordinated Universal Time (UTC). This example represents Monday, April 17, 2006 at 2:22:48 PM UTC.
“2006-04-17T14:22:48.0000000”
The following example shows how to set this parameter to the date May 1, 2012 at 5 PM.
-AccountExpirationDate “05/01/2012 5:00:00 PM”
Default Value:
Data Type: System.Nullable[System.DateTime]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
AccountNotDelegated
Specifies whether the security context of the user is delegated to a service. When this parameter is set to true, the security context of the account is not delegated to a service even when the service account is set as trusted for Kerberos delegation. This parameter sets the AccountNotDelegated property for an Active Directory account. This parameter also sets the ADS_UF_NOT_DELEGATED flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include
$false or 0
$true or 1
The following example shows how to set this parameter so that the security context of the account is not delegated to a service.
-AccountNotDelegated $true
Default Value:
Data Type: System.Nullable[bool]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Add
Specifies values to add to an object property. Use this parameter to add one or more values to a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can specify multiple values to a property by specifying a comma-separated list of values and more than one property by separating them using a semicolon.. The format for this parameter is
-Add @{Attribute1LDAPDisplayName=value1, value2, …; Attribute2LDAPDisplayName=value1, value2, …; AttributeNLDAPDisplayName=value1, value2, …}
For example, if you want to remove the value “555-222-2222” and add the values “555-222-1111” and “555-222-3333” to Phone-Office-Other attribute (LDAP display name ‘otherTelephone’), and add the value “555-222-9999” to Phone-Mobile-Other (LDAP display name ‘otherMobile’), set the Add and Remove parameters as follows.
-Add @{otherTelephone=’555-222-1111′, ‘555-222-3333′; otherMobile=’555-222-9999′ } -Remove @{otherTelephone=’555-222-2222’}
When you use the Add, Remove, Replace and Clear parameters together, the operations will be performed in the following order:
..Remove
..Add
..Replace
Default Value:
Data Type: hashtable
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
AllowReversiblePasswordEncryption
Specifies whether reversible password encryption is allowed for the account. This parameter sets the AllowReversiblePasswordEncryption property of the account. This parameter also sets the ADS_UF_ENCRYPTED_TEXT_PASSWORD_ALLOWED flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include:
$false or 0
$true or 1
The following example shows how to set this parameter to true.
-AllowReversiblePasswordEncryption $true
Default Value:
Data Type: System.Nullable[bool]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
AuthType
Specifies the authentication method to use. Possible values for this parameter include:
Negotiate or 0
Basic or 1
The default authentication method is Negotiate.
A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.
The following example shows how to set this parameter to Basic.
-AuthType Basic
The following lists the acceptable values for this parameter:
- Negotiate
- Basic
Default Value: Microsoft.ActiveDirectory.Management.AuthType.Negotiate
Data Type: ADAuthType
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
CannotChangePassword
Specifies whether the account password can be changed. This parameter sets the CannotChangePassword property of an account. Possible values for this parameter include:
$false or 0
$true or 1
The following example shows how to set this parameter so that the account password can be changed.
-CannotChangePassword $false
Default Value:
Data Type: System.Nullable[bool]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Certificates
Modifies the DER-encoded X.509v3 certificates of the account. These certificates include the public key certificates issued to this account by the Microsoft Certificate Service. This parameter sets the Certificates property of the account object. The LDAP Display Name (ldapDisplayName) for this property is “userCertificate”.
Syntax:
To add values:
-Certificates @{Add=value1,value2,…}
To remove values:
-Certificates @{Remove=value3,value4,…}
To replace values:
-Certificates @{Replace=value1,value2,…}
To clear all values:
-Certificates $null
You can specify more than one operation by using a list separated by semicolons. For example, use the following syntax to add and remove Certificate values
-Certificates @{Add=value1,value2,…};@{Remove=value3,value4,…}
The operators will be applied in the following sequence:
..Remove
..Add
..Replace
The following example shows how to create a certificate by using the New-Object cmdlet, and then add it to a user account. When this cmdlet is run,
$cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate certificate1.cer
Set-ADUser saradavis -Certificates @{Add=$cert}
The following example shows how to add a certificate that is specified as a byte array.
Set-ADUser saradavis -Certificates @{Add= [Byte[]](0xC5,0xEE,0x53,…)}
Default Value:
Data Type: hashtable
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
ChangePasswordAtLogon
Specifies whether a password must be changed during the next logon attempt. Possible values for this parameter include:
$false or 0
$true or 1
This parameter cannot be set to $true or 1 for an account that also has the PasswordNeverExpires property set to true.
The following example shows how to set this parameter so that the password must be changed at logon.
-ChangePasswordAtLogon $true
Default Value:
Data Type: System.Nullable[bool]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
City
Specifies the user’s town or city. This parameter sets the City property of a user. The LDAP display name (ldapDisplayName) of this property is “l”.
The following example shows how set this parameter.
-City “Las Vegas”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Clear
Specifies an array of object properties that will be cleared in the directory. Use this parameter to clear one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is
-Clear Attribute1LDAPDisplayName, Attribute2LDAPDisplayName
For example, if you want to clear the value for the Phone-Office-Other attribute (LDAP display name ‘otherTelephone’) set the Clear parameter as follows.
-Clear otherTelephone
When you use the Add, Remove, Replace and Clear parameters together, the operations will be performed in the following order:
..Remove
..Add
..Replace
..Clear
Default Value:
Data Type: string[]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | true | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | true | variableLength |
Company
Specifies the user’s company. This parameter sets the Company property of a user object. The LDAP display name (ldapDisplayName) of this property is “company”.
The following example shows how to set this parameter.
-Company “Contoso”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Country
Specifies the country or region code for the user’s language of choice. This parameter sets the Country property of a user object. The LDAP Display Name (ldapDisplayName) of this property is “c”. This value is not used by Windows 2000.
The following example shows how set this parameter.
-Country “IN”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Credential
Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.
To specify this parameter, you can type a user name, such as “User1” or “Domain01\User01” or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.
You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object The following example shows how to create credentials.
$AdminCredentials = Get-Credential “Domain01\User01”
The following shows how to set the Credential parameter to these credentials.
-Credential $AdminCredentials
If the acting credentials do not have directory-level permission to perform the task, Active Directory PowerShell returns a terminating error.
Default Value:
Data Type: PSCredential
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Department
Specifies the user’s department. This parameter sets the Department property of a user. The LDAP Display Name (ldapDisplayName) of this property is “department”.
The following example shows how to set this parameter.
-Department “Development”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Description
Specifies a description of the object. This parameter sets the value of the Description property for the object. The LDAP Display Name (ldapDisplayName) for this property is “description”.
The following example shows how to set this parameter to a sample description.
-Description “Description of the object”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
DisplayName
Specifies the display name of the object. This parameter sets the DisplayName property of the object. The LDAP Display Name (ldapDisplayName) for this property is “displayName”.
The following example shows how to set this parameter.
-DisplayName “Sara Davis Laptop”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Division
Specifies the user’s division. This parameter sets the Division property of a user object. The LDAP Display Name (ldapDisplayName) of this property is “division”.
The following example shows how to set this parameter.
-Division “Software”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
EmailAddress
Specifies the user’s e-mail address. This parameter sets the EmailAddress property of a user object. The LDAP Display Name (ldapDisplayName) of this property is “mail”.
The following example shows how to set this parameter.
-EmailAddress “saradavis@contoso.com”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
EmployeeID
Specifies the user’s employee ID. This parameter sets the EmployeeID property of a user object. The LDAP Display Name (ldapDisplayName) of this property is “employeeID”.
The following example shows how to set this parameter.
-EmployeeID “A123456”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
EmployeeNumber
Specifies the user’s employee number. This parameter sets the EmployeeNumber property of a user object. The LDAP Display Name (ldapDisplayName) of this property is “employeeNumber”.
The following example shows how set this parameter.
-EmployeeNumber “12345678”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Enabled
Specifies if an account is enabled. An enabled account requires a password. This parameter sets the Enabled property for an account object. This parameter also sets the ADS_UF_ACCOUNTDISABLE flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include:
$false or 0
$true or 1
The following example shows how to set this parameter to enable the account.
-Enabled $true
Default Value:
Data Type: System.Nullable[bool]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Fax
Specifies the user’s fax phone number. This parameter sets the Fax property of a user object. The LDAP Display Name (ldapDisplayName) of this property is “facsimileTelephoneNumber”.
The following example shows how to set this parameter.
-Fax “+1 (999) 555 1212”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
GivenName
Specifies the user’s given name. This parameter sets the GivenName property of a user object. The LDAP Display Name (ldapDisplayName) of this property is “givenName”.
The following example shows how to set this parameter.
-givenName “Sanjay”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
HomeDirectory
Specifies a user’s home directory. This parameter sets the HomeDirectory property of a user object. The LDAP Display Name (ldapDisplayName) for this property is “homeDirectory”.
The following example shows how to set this parameter.
-HomeDirectory “\\users\saraDavisHomeDir”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
HomeDrive
Specifies a drive that is associated with the UNC path defined by the HomeDirectory property. The drive letter is specified as “
The following example shows how to set this parameter.
-HomeDrive “D:”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
HomePage
Specifies the URL of the home page of the object. This parameter sets the homePage property of an Active Directory object. The LDAP Display Name (ldapDisplayName) for this property is “wWWHomePage”.
The following example shows how to set this parameter to a URL.
-HomePage “http://employees.contoso.com/sdavis”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
HomePhone
Specifies the user’s home telephone number. This parameter sets the HomePhone property of a user. The LDAP Display Name (ldapDisplayName) of this property is “homePhone”.
The following example shows how to set this parameter.
-HomePhone “+1 (999) 555 1212”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Identity
Specifies an Active Directory user object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute.
Distinguished Name
Example: CN=SaraDavis,CN=Europe,CN=Users,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Security Identifier (objectSid)
Example: S-1-5-21-3165297888-301567370-576410423-1103
SAM account name (sAMAccountName)
Example: saradavis
The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.
This parameter can also get this object through the pipeline or you can set this parameter to an object instance.
This example shows how to set the parameter to a distinguished name.
-Identity “CN=SaraDavis,CN=Europe,CN=Users,DC=corp,DC=contoso,DC=com”
This example shows how to set this parameter to a user object instance named “userInstance”.
-Identity $userInstance
Default Value:
Data Type: ADUser
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | true (ByValue) | pipelineInput |
Position? | 1 | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Initials
Specifies the initials that represent part of a user’s name. You can use this value for the user’s middle initial. This parameter sets the Initials property of a user. The LDAP Display Name (ldapDisplayName) of this property is “initials”.
The following example shows how set this parameter.
-Initials “L”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Instance
Specifies an ADUser object that identifies the Active Directory user object that should be modified and the set of changes that should be made to that object. When this parameter is used, any modifications made to the ADUser object are also made to the corresponding Active Directory object. The cmdlet only updates the object properties that have changed.
The ADUser object specified as the value of the -Instance parameter must have been retrieved by using the Get-ADUser cmdlet. When you specify the Instance parameter, you cannot specify other parameters that set individual properties on the object.
The following is an example of how to use the Get-ADUser cmdlet to retrieve an instance of the ADUser object. The object is modified by using the Windows PowerShell command line. Then the Set-ADUser cmdlet saves the changes to the Active Directory object.
Step 1: Retrieve a local instance of the object.
$userInstance = Get-ADUser -Identity saraDavis
Step 2: Modify one or more properties of the object instance.
$userInstance.EmailAddress = “saradavis@contoso.com”
Step3: Save your changes to saraDavis.
Set-ADUser -Instance $userInstance
Default Value:
Data Type: ADUser
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
LogonWorkstations
Specifies the computers that the user can access. To specify more than one computer, create a single comma-separated list. You can identify a computer by using the Security Accounts Manager (SAM) account name (sAMAccountName) or the DNS host name of the computer. The SAM account name is the same as the NetBIOS name of the computer.
The LDAP display name (ldapDisplayName) for this property is “userWorkStations”.
The following example shows how to set this parameter by using SAMAccountName (NetBIOS name) and DNSHostName values.
-LogonWorkstations “saraDavisDesktop,saraDavisLapTop,projectA.corp.contoso.com”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Manager
Specifies the user’s manager. This parameter sets the Manager property of a user. This parameter is set by providing one of the following property values. Note: The identifier in parentheses is the LDAP display name for the property.
Distinguished Name
Example: CN=SaraDavis,CN=Europe,CN=Users,DC=corp,DC=contoso,DC=com
GUID (objectGUID)
Example: 599c3d2e-f72d-4d20-8a88-030d99495f20
Security Identifier (objectSid)
Example: S-1-5-21-3165297888-301567370-576410423-1103
SAM Account Name (sAMAccountName)
Example: saradavis
The LDAP Display Name (ldapDisplayName) of this property is “manager”.
The following example shows how to set this parameter.
-Manager saradavis
Default Value:
Data Type: ADUser
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
MobilePhone
Specifies the user’s mobile phone number. This parameter sets the MobilePhone property of a user object. The LDAP Display Name (ldapDisplayName) of this property is “mobile”.
The following example shows how to set this parameter.
-MobilePhone “+1 (999 ) 555 1212”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Office
Specifies the location of the user’s office or place of business. This parameter sets the Office property of a user object. The LDAP display name (ldapDisplayName) of this property is “office”.
The following example shows how to set this parameter.
-Office “D1042”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
OfficePhone
Specifies the user’s office telephone number. This parameter sets the OfficePhone property of a user object. The LDAP display name (ldapDisplayName) of this property is “telephoneNumber”.
The following example shows how to set this parameter.
-OfficePhone “+1 (999) 555 1212”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Organization
Specifies the user’s organization. This parameter sets the Organization property of a user object. The LDAP display name (ldapDisplayName) of this property is “o”.
The following example shows how to set this parameter.
-Organization “Accounting”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
OtherName
Specifies a name in addition to a user’s given name and surname, such as the user’s middle name. This parameter sets the OtherName property of a user object. The LDAP Display Name (ldapDisplayName) of this property is “middleName”.
The following example shows how to set this parameter.
-OtherName “Peter”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Partition
Specifies the distinguished name of an Active Directory partition. The distinguished name must be one of the naming contexts on the current directory server. The cmdlet searches this partition to find the object defined by the Identity parameter.
The following two examples show how to specify a value for this parameter.
-Partition “CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM”
-Partition “CN=Schema,CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM”
In many cases, a default value will be used for the Partition parameter if no value is specified. The rules for determining the default value are given below. Note that rules listed first are evaluated first and once a default value can be determined, no further rules will be evaluated.
In AD DS environments, a default value for Partition will be set in the following cases: – If the Identity parameter is set to a distinguished name, the default value of Partition is automatically generated from this distinguished name.
– If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically generated from the current path in the drive.
– If none of the previous cases apply, the default value of Partition will be set to the default partition or naming context of the target domain.
In AD LDS environments, a default value for Partition will be set in the following cases:
– If the Identity parameter is set to a distinguished name, the default value of Partition is automatically generated from this distinguished name.
– If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically generated from the current path in the drive.
– If the target AD LDS instance has a default naming context, the default value of Partition will be set to the default naming context. To specify a default naming context for an AD LDS environment, set the msDS-defaultNamingContext property of the Active Directory directory service agent (DSA) object (nTDSDSA) for the AD LDS instance.
– If none of the previous cases apply, the Partition parameter will not take any default value.
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
PassThru
Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not generate any output.
Default Value:
Data Type: switch
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
PasswordNeverExpires
Specifies whether the password of an account can expire. This parameter sets the PasswordNeverExpires property of an account object. This parameter also sets the ADS_UF_DONT_EXPIRE_PASSWD flag of the Active Directory User Account Control attribute. Possible values for this parameter include:
$false or 0
$true or 1
Note: This parameter cannot be set to $true or 1 for an account that also has the ChangePasswordAtLogon property set to true.
The following example shows how to set this parameter so that the password can expire.
-PasswordNeverExpires $false
Default Value:
Data Type: System.Nullable[bool]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
PasswordNotRequired
Specifies whether the account requires a password. This parameter sets the PasswordNotRequired property of an account, such as a user or computer account. This parameter also sets the ADS_UF_PASSWD_NOTREQD flag of the Active Directory User Account Control attribute. Possible values for this parameter are:
$false or 0
$true or 1
The following example shows how to set this parameter so that as password is not required for the account.
-PasswordNotRequired $true
Default Value:
Data Type: System.Nullable[bool]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
POBox
Specifies the user’s post office box number. This parameter sets the POBox property of a user object. The LDAP Display Name (ldapDisplayName) of this property is “postOfficeBox”.
The following example shows how to set this parameter.
-POBox “25662”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
PostalCode
Specifies the user’s postal code or zip code. This parameter sets the PostalCode property of a user. The LDAP Display Name (ldapDisplayName) of this property is “postalCode”.
The following example shows how to set this parameter.
-PostalCode “28712”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
ProfilePath
Specifies a path to the user’s profile. This value can be a local absolute path or a Universal Naming Convention (UNC) path. This parameter sets the ProfilePath property of the user object. The LDAP display name (ldapDisplayName) for this property is “profilePath”.
The following examples show how to set this parameter to a local path and to a UNC path. -ProfilePath “E:\users\profiles\saraDavis”
-ProfilePath “\\users\profiles\saraDavis”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Remove
Specifies that the cmdlet remove values of an object property. Use this parameter to remove one or more values of a property that cannot be modified using a cmdlet parameter. To remove an object property, you must use the LDAP display name. You can remove more than one property by specifying a semicolon-separated list. The format for this parameter is
-Remove @{Attribute1LDAPDisplayName=value[]; Attribute2LDAPDisplayName=value[]}
For example, if you want to add the values blue and green and remove the value pink from a property with a LDAP display name of FavColors, set the Add and Remove parameters as follows.
-Add @{FavColors=Blue,Green} -Remove {FavColors=Pink}
When you use the Add, Remove, Replace and Clear parameters together, the parameters will be applied in the following sequence:
..Remove
..Add
..Replace
..Clear
Default Value:
Data Type: hashtable
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Replace
Specifies values for an object property that will replace the current values. Use this parameter to replace one or more values of a property that cannot be modified using a cmdlet parameter. To modify an object property, you must use the LDAP display name. You can modify more than one property by specifying a comma-separated list. The format for this parameter is
-Replace @{Attribute1LDAPDisplayName=value[], Attribute2LDAPDisplayName=value[]}
For example, if you want to replace the value “555-222-2222” with the values “555-222-1111” for Phone-Office-Other attribute (LDAP display name ‘otherTelephone’) set the Replace parameter as follows.
-Replace @{otherTelephone=’555-222-2222′, ‘555-222-1111’}
When you use the Add, Remove, Replace and Clear parameters together, the operations will be performed in the following order:
..Remove
..Add
..Replace
..Clear
Default Value:
Data Type: hashtable
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
SamAccountName
Specifies the Security Account Manager (SAM) account name of the user, group, computer, or service account. The maximum length of the description is 256 characters. To be compatible with older operating systems, create a SAM account name that is 20 characters or less. This parameter sets the SAMAccountName for an account object. The LDAP display name (ldapDisplayName) for this property is “sAMAccountName”.
The following example shows how to specify this parameter.
-SAMAccountName “saradavis”
Note: If the string value provided is not terminated with a ‘$’ character, the system adds one if needed.
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
ScriptPath
Specifies a path to the user’s log on script. This value can be a local absolute path or a Universal Naming Convention (UNC) path. This parameter sets the ScriptPath property of the user. The LDAP display name (ldapDisplayName) for this property is “scriptPath”.
The following example shows how to set this parameter.
-ScriptPath “\\logonScripts\saradavisLogin”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Server
Specifies the Active Directory Domain Services instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.
Domain name values:
Fully qualified domain name
Examples: corp.contoso.com
NetBIOS name
Example: CORP
Directory server values:
Fully qualified directory server name
Example: corp-DC12.corp.contoso.com
NetBIOS name
Example: corp-DC12
Fully qualified directory server name and port
Example: corp-DC12.corp.contoso.com:3268
The default value for the Server parameter is determined by one of the following methods in the order that they are listed:
-By using Server value from objects passed through the pipeline.
-By using the server information associated with the Active Directory PowerShell provider drive, when running under that drive.
-By using the domain of the computer running Powershell.
The following example shows how to specify a full qualified domain name as the parameter value.
-Server “corp.contoso.com”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
ServicePrincipalNames
Specifies the service principal names for the account. This parameter sets the ServicePrincipalNames property of the account. The LDAP display name (ldapDisplayName) for this property is servicePrincipalName. This parameter uses the following syntax to add remove, replace or clear service principal name values.
Syntax:
To add values:
-ServicePrincipalNames @{Add=value1,value2,…}
To remove values:
-ServicePrincipalNames @{Remove=value3,value4,…}
To replace values:
-ServicePrincipalNames @{Replace=value1,value2,…}
To clear all values:
-ServicePrincipalNames $null
You can specify more than one change by using a list separated by semicolons. For example, use the following syntax to add and remove service principal names.
@{Add=value1,value2,…};@{Remove=value3,value4,…}
The operators will be applied in the following sequence:
..Remove
..Add
..Replace
The following example shows how to add and remove service principal names.
-ServicePrincipalNames-@{Add=”SQLservice\accounting.corp.contoso.com:1456″};{Remove=”SQLservice\finance.corp.contoso.com:1456″}
Default Value:
Data Type: hashtable
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
SmartcardLogonRequired
Specifies whether a smart card is required to logon. This parameter sets the SmartCardLoginRequired property for a user. This parameter also sets the ADS_UF_SMARTCARD_REQUIRED flag of the Active Directory User Account Control attribute. Possible values for this parameter are:
$false or 0
$true or 1
The following example shows how to set this parameter so that a smart card is required to logon to the account.
-SmartCardLogonRequired $true
Default Value:
Data Type: System.Nullable[bool]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
State
Specifies the user’s or Organizational Unit’s state or province. This parameter sets the State property of a User or Organizational Unit object. The LDAP display name (ldapDisplayName) of this property is “st”.
The following example shows how set this parameter.
-State “Nevada”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
StreetAddress
Specifies the user’s street address. This parameter sets the StreetAddress property of a user object. The LDAP display name (ldapDisplayName) of this property is “streetAddress”.
The following example shows how to set this parameter.
-StreetAddress “1200 Main Street”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Surname
Specifies the user’s last name or surname. This parameter sets the Surname property of a user object. The LDAP display name (ldapDisplayName) of this property is “sn”.
The following example shows how to set this parameter.
-Surname “Patel”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Title
Specifies the user’s title. This parameter sets the Title property of a user object. The LDAP display name (ldapDisplayName) of this property is “title”.
The following example shows how to set this parameter.
-Title “Manager”
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
TrustedForDelegation
Specifies whether an account is trusted for Kerberos delegation. A service that runs under an account that is trusted for Kerberos delegation can assume the identity of a client requesting the service. This parameter sets the TrustedForDelegation property of an account object. This value also sets the ADS_UF_TRUSTED_FOR_DELEGATION flag of the Active Directory User Account Control attribute. Possible values for this parameter are:
$false or 0
$true or 1
The following example shows how to specify that an account is trusted for Kerberos delegation.
-TrustedForDelegation $true
Default Value:
Data Type: System.Nullable[bool]
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
UserPrincipalName
Each user account has a user principal name (UPN) in the format
Default Value:
Data Type: string
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | true | required |
Variable Length? | false | variableLength |
Confirm
Prompts you for confirmation before executing the command.
Default Value:
Data Type: SwitchParameter
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | true | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
WhatIf
Describes what would happen if you executed the command without actually executing the command.
Default Value:
Data Type: SwitchParameter
Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | true | variableLength |
Accept wildcard characters? | false | globbing |
Accept Pipeline Input? | false | pipelineInput |
Position? | named | position |
Value Attributes
Name | Value | PSMAML Attribute |
---|---|---|
Required? | false | required |
Variable Length? | false | variableLength |
Input Type
None or Microsoft.ActiveDirectory.Management.ADUser
A user object is received by the Identity parameter.A user object that was retrieved by using the Get-ADUser cmdlet and then modified is received by the Instance parameter.
Return Type
None or Microsoft.ActiveDirectory.Management.ADUser
Returns the modified user object when the PassThru parameter is specified. By default, this cmdlet does not generate any output.
Notes
- This cmdlet does not work with an Active Directory Snapshot.
This cmdlet does not work with a read-only domain controller.
Examples
————————– EXAMPLE 1 ————————–
Command Prompt: C:\PS>
Set-ADUser AntonioAl -HomePage 'http://fabrikam.com/employees/AntonioAl' -LogonWorkstations 'AntonioAl-DSKTOP,AntonioAl-LPTOP'
Set the user with samAccountName AntonioAL’s property homepage to http://fabrikam.com/employees/AntonioAl and the LogonWorkstations property to AntonioAl-DSKTOP,AntonioAl-LPTOP.
————————– EXAMPLE 2 ————————–
Command Prompt: C:\PS>
Get-ADUser -Filter 'Name -like "*"' -SearchBase 'OU=HumanResources,OU=UserAccounts,DC=FABRIKAM,DC=COM' -Properties DisplayName | % {Set-ADUser $_ -DisplayName ($_.Surname + ' ' + $_.GivenName)}
Get all the users in the directory that are located underneath the OU=HumanResources,OU=UserAccounts,DC=FABRIKAM,DC=COM organizationalUnit. Set the DisplayName property on these user objects to the concatentation of the Surname property and the GivenName property.
————————– EXAMPLE 3 ————————–
Command Prompt: C:\PS>
Set-ADUser GlenJohn -Replace @{title="director";mail="glenjohn@fabrikam.com"}
Set the user with samAccountNAme GlenJohn’s property title to director and property mail to glenjohn@fabrikam.com.
————————– EXAMPLE 4 ————————–
Command Prompt: C:\PS>
Set-ADUser GlenJohn -Remove @{otherMailbox="glen.john"} -Add @{url="fabrikam.com"} -Replace @{title="manager"} -Clear description
Modify the user with samAccountName GlenJohn’s object by removing glen.john from the otherMailbox property, adding fabrikam.com to the url property, replacing the title property with manager and clearing the description property.
————————– EXAMPLE 5 ————————–
Command Prompt: C:\PS>
$user = Get-ADUser GlenJohn -Properties mail,department $user.mail = "glen@fabrikam.com" $user.department = "Accounting" Set-ADUser -instance $user
Set the mail and department properties on the user object with samAccountName GlenJohn by using the instance parameter.
————————– EXAMPLE 6 ————————–
Command Prompt: C:\PS>
# create a byte array for the M-F 8:00 am to 5 pm logon hours $hours = New-Object byte[] 21 $hours[5] = 255; $hours[8] = 255; $hours[11] = 255; $hours[14] = 255; $hours[17] = 255; $hours[6] = 1; $hours[9] = 1; $hours[12] = 1; $hours[15] = 1; $hours[18] = 1; # create a hashtable to update the logon hours and a description $replaceHashTable = New-Object HashTable $replaceHashTable.Add("logonHours", $hours) $replaceHashTable.Add("description", "Sarah Davis can only logon from Monday through Friday from 8:00 AM to 5:00 PM") # set the value of the logonHours and description attributes Set-ADUser "SarahDavis" -Replace $replaceHashTable
Set the user logon hours to Monday through Friday from 8:00 AM to 5:00 PM and add a description. It updates the “logonHours” attribute with the specified byte array and the description attribute with the specified string.